75 models
Commercial Use This Model Is Licensed Under Attribution-NoDerivatives 4.0 International So You Can Sell It But You Have To Credit Me That It's My Model. You Can't Remix Or Edit It! Tested On Sunlu PLA Thanks For Prints! Link To Plastic…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
Tired of snapping carbon fiber arms or cracking rigid plastic frames during basement laps or sidewalk proximity flying? This 75mm micro frame is designed specifically for durability and flexibility, utilizing the unique properties of TPU…
https://youtube.com/shorts/IHuoRIZewV0?feature=share Thank you to others for inspiration - I am certainly not the 1st to have this idea. Print flat on bed, feel free to use the blade to push in the pins (or, say, a screwdriver) I…
Keyflipper is easy to print thing for your keys you put it on your finger and you spin it it does need a 603rs bearing thickness is 5 mm and outer size is 27 mm inside doesnt matter as you need to buy it for your finger
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
Lightweight prop guard / cage for Crazyflie 2.1 quadcopter intended to indoor flying. The entire assembly only weights 3.4 g, is quick & easy to print, fits on stock Crazyflie 2.1 and assembly takes only a few minutes, no clue required.…
A case to hold the FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller (https://www.amazon.com/dp/B07Z9YNP7S), 8x AA batteries, and assorted accessories. The battery mounts are remixed from https://www.thingiverse.com/thing:9805 and the…
This is a case for the awesome EasyFlash 3 cartridge for the Commodore 64. The case provides openings for the 3 push buttons and for the USB connector of the cartridge. Update: The new revision of the case features an additional recess…
Available also on Makerworld: click Keyflipper Keychain This is a keychain spinner inspired by the keychain ring, but a lot smoother. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress.…
This is a very simple Gridfinity spray can holder. It is made for cans which have a diameter of 53 mm, like WD-40 (250 ml), Kontakt 61 (200 m), Silicone Spray and so on.
1:1 Kopie des originalen Chunky Flavour Löffels von More Nutrition mit exakt identischem Füllvolumen. Ich habe meiner Freundin Halter für die Scoops in den Dosen gedruckt, leider sind bei vielen Dosen die kürzeren dabei, welche dann in…
This is a remix of the flywheel cage for the Mayfly by Gemeneye, to have the proper crush/spacing (19.5mm) for Worker Nightingale flywheels. You can use this with Honeybadger or Loki motors, or other similar high RPM motors. I've been…
This is a case made to fit the size and cost reduced version of the EasyFlash 1 cartridge for the Commodore 64 created by D.Mantione in 2022. Several variations of the top shell are included, allowing you to choose whether to make LED and…
A Gridfinity compatible tray made specifically for the HOTO Easyflow Cordless Hot Glue Gun . Includes cutouts for all the included accessories and manual. Takes up 4x4 gridfinity units and is half height. I use this on top of a 4x4xHalf…
Introduction; As part of an 18-week school project, I've researched the difficulties in the lives of the elderly. It appears over 65% of people above the age of 60 (in the Netherlands) experience some difficulty while opening plastic…
Keyflower organizer remixed to hold mini-expansion promo tiles. The green meeple box has an area to hold Key Celeste and Keymelequin. I combined all the base game boxes into a single tile holder. I combined all expansions into a second…
Very fine detail- - you will need to scale this up a tiny bit if you want full detail WITH 0.2MM nozzle. You will need to scale this up a good bit more for full detail with 0.4mm nozzle. I used adhesion- might work without. Took about…
These are a pair of well-fitted mounting brackets to wall-mount a Mayflash F500. Modeled in Onshape, they match the angles of the body of the joystick and hold it flush against the wall. I printed in PETG with 0.2mm layers, but PLA should…
This is a mounting bracket for the Skyflar strobe light designed to mount to an Air Conception Nitro titanium paramotor frame (V1 and V2). Mounts to the carbon fiber spars with zip ties and allows the strobe to stick through the net and…
Customized version of https://www.thingiverse.com/thing:62800 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_primary = triple gopro_secondary_what =…
I found that the player shield in keyflower often fell over with the slightest bump. So i thought to create a stand that can hold the player shield well enough to keep it from falling over. Then i thought it would look nicer if it fit the…
If necessary, you can customise it here: https://cad.onshape.com/documents/f02dbf3cf1154ed4ee5d6051/w/abd3d916fcf47516a7c05a01/e/50576efde398440c053bf4c8?renderMode=0&uiState=64df5639ae50370d8a991978
this is a print porfile made for the A1mini printer with polymakers polyflex 95A TPU and with easier supports | original V
This bracket mounts the Infinityflow S1+ to the right side of the Sovol SV08 Max. It uses the existing M3 holes on the upper frame (normally used to mount the enclosure). Longer M3 bolts than used for enclosure will be needed. M3 bolts…
There wasn't a PolyFlex TPU profile in PrusaSlicer so I decided to do a little bit of tuning and arrived with this. Please note that I use a DiamondBack nozzle so you may need to run a temperature tower to find which temp works best with…
This is a version of @Gemeneye_212233's Slide Replacement/Stock Attachment for the Mayfly (Nerf Maverick flywheel conversion) with Fidlock stud attachment locations on the left hand side of the slide. The studs are 60mm apart, and it is…
Did not like this thing flying around willy-nilly on my desk. Should snap into place around the bottom of the adaptor. Print with PLA+ or similar for rigidity and secure to desk with M3 screws
Its the slide for the mayfly with Picatinny replacing the nerf rail, that is all!
Cosmetic mod which splits the cylinder into two pieces to allow you to print the front in a different color and get closer to the original Maverick look. Disclaimer that this is not airtight and would let water in (but who's running a…
Customized version of https://www.thingiverse.com/thing:62800 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_primary = triple gopro_secondary_what =…
I needed a way to attached Bruce Leedle's mega master-key to my newly assembled/built Mayfly. This (no hardware) clip on picatinny will work on a stock Maverick or a Mayfly. To help fitment and remove any rattle I added a .5" strip of…
This is a simple sulution to that problem that everyone has with their airfryer and downdraft vent, when you make fries or something else your intire kitchen will smell like it for the rest of the day. The FryFlow Redirect redirects the…
Deutsch: Ich habe zwei Modelle einer Halterung für MAM-Babyflaschen entworfen, die sich ideal am Bett des Kindes oder an anderen Orten befestigen lassen. Diese Halterungen sind robust, einfach zu montieren und bieten eine bequeme…
Candyfloss on a cone like you get at festivals and circus'. The tip of the cone is cut off to make it less pointy for safety. Made this for my sons babtism as decorations for the tables. Colors match genders and real-life candyfloss…
These are not perfect, but the mounts downloaded here did not match my update S1 Plus. I made a few modifications to make it work with the cutters.
If you want to recreate a 3mf, either export bots parts separately or use colorscad .
I needed a way to attach the gold greeble "button" to the 89 Sabers Skinnyflex being able to remove it later with little work involved. This is designed to have a 6mm x 3mm magnet for the center. You need to glue the magnet in to where…
Keychain inspired by the works of rapper and YouTuber YoungMulti with the YFL logo Young Family Label . Printed in two colors, without systems
Based on a picture that keeps popping up on my Pinterest. Made using Blender. UNTESTED PRINT - please let me know if it works :)
This is a remix for the Infintyflow s1 Plus holder. It flattens the position, adds insert points on the left and right for the plug, open bottom for easy access to plug and Bluetooth switch.
Collar to the jayflex hyperbell this will replace it for you and avoid the $10 shipping fee
Mount the InfinityFlow S1 Automatic Filament Reloader to the side the Prusa XL. This mounts to the frame extrusion of the Prusa XL. You can fit four S1 Automatic Filament Reloaders, two on each side. Works with the S1 and S1 Plus - S1…
Usage Print 2 pieces (no supports, PLA or PETG) Slide onto either end of the sensor bar with center stand removed Orientation matters! Set on top your gaming monitor
Clip ceinture pour flasque Raidlight EazyFlask 350ml A contrôler pour les autres dimensions, le culot doit faire 45mm de diamètre. V2 : version plus rigide
This is my own project of keyrambit. Printing Instructions: This model is designed to be printed on a 3D printer with a minimum bed size of 50x50x50mm. It is recommended to use a layer height of 0.2mm or less for best results. supports is…
This is the second version of the rev trigger for the nerf mayfly conversion, as you can see this version is a more traditional rev trigger that is more inline with the stryfe you will need to do a bit more plastic removal than my…
This is a mount for the InfinityFlow S1 to sit on the frame of a Prusa printer. I designed it to sit at a similar angle that the MMU3 does, but also tilted enough that you can see the lights on the S1. I printed mine with 5 perimeters, 0…
See this for the drybox parts. https://www.printables.com/model/1311299-drybox-parts-using-rubbermaid-21-cup-dry-food-cont Infinityflow filament feeder: https://infinityflow3d.com/ These sides fit the Infinityflow feeder and support the…
Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and Gyroid pattern.Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and…
Project Mayflower was a secret group of humans chosen to return with the aliens in "Close Encounters of the Third Kind". The logo is seen a few times but not clearly. I worked from my 4K copy of the film and took some artistic liberties,…
Replacement Landing Gear for MB-22 Skyflame. Normally a minicon is used as the front landing gear, but if you want him attached somewhere else or don't like how it doesn't quite come off easily, you can use this instead.
This is a Rev Trigger for the Maverick Fly wheel conversion “The Mayfly”. Was asked to post this model so here it is, print at whatever settings the filament you have is best at. You will have to cut a hole where the lever roller is at in…
Based on our previous compliant soccer ball design, we've extended the range of these modular units, and have included connectors with more sides, and beams with a greater variety of lengths, letting you be even more expressive with your…
This is a replacement attach of the wing on Skyflex. Attache pour l'aile du SkyFlex à la nacelle. Print Settings Printer: HK Fabrikator Mini 2 Rafts: Yes Supports: No Resolution: 0.2 Infill: 100% Notes: Print both vertically. Category:…
This is a cable box I “made” fitting the Mayflower Ark MK II dac/amp on top. It can fit the expanse cable of a headphone inside, tidying up the workspace. Its a modification of a hinged box I found a tutorial about on youtube, its linked…
I couldn't find anything for this specific adapter, so I decided to learn a bit of 3d modelling and make one myself. You still have access to the buttons on top, you just have to slide the adapter out a bit. Might add a small lip to the…
Manually paint the support on the hinge area as well as the latch. Make the layer height as small as possible.
VYFLY V2 Buzzer mount for a Flywoo Explorer lr. The buzzer mount that came with it is made for flywoo's buzzer and it is super small compared to the more popular vyfly. this will hold it and give you a hole for the button on the side. It…
Keyflipper! Easy to print! Fast and easy! Requires a 6803 (61803) bearing to function. Answearing all questiona about selling, YES you can sell it, but you need to add Atribbution! (something like “Easy keyflipper by Chrzastek…
The mayfly spring door failed me for the last time, so i made a slight redesign so you can add a heat set insert to the right side of the battery door. allows the use of a thumb screw which is IMO more reliable. you need these to make it:…
Allows the InfinityFlow S1+ Automatic Filament Loader to rest on a wire shelf with 2" wire spacing. CAD file attached if you want to adjust for other wire spacing. Print 4 per S1+.
A place to hold your towels while camping in your Jayco Trailer.
Fixed cables are a PITA, so I wanted to make the USB cable on my fightstick detachable. I used a dremel to widen the existing notch that was used for the original USB cable. My wishlist of improvements for this are as follows A top cover…
I printed this because I needed something to hold my filament, reduce humidity, and feed the filament at the same time. So, I came up with this. It was designed to sit on the same table next to the printer. I only tested it with 1kg…
pamětní placka k festivalu TyfloArt v Sezimově ústí
I needed a way to attached Bruce Leedle's mega master-key to my newly assembled/built Mayfly. This (no hardware) clip on picatinny will work on a stock Maverick or a Mayfly. To help fitment and remove any rattle I added a .5" strip of…
This bracket mounts the Infinityflow S1+ to the right side of the Sovol SV08 Max. It uses the existing M3 holes on the upper frame (normally used to mount the enclosure). Longer M3 bolts than used for enclosure will be needed. M3 bolts…
1:1 Kopie des originalen Chunky Flavour Löffels von More Nutrition mit exakt identischem Füllvolumen. Ich habe meiner Freundin Halter für die Scoops in den Dosen gedruckt, leider sind bei vielen Dosen die kürzeren dabei, welche dann in…
Commercial Use This Model Is Licensed Under Attribution-NoDerivatives 4.0 International So You Can Sell It But You Have To Credit Me That It's My Model. You Can't Remix Or Edit It! Tested On Sunlu PLA Thanks For Prints! Link To Plastic…
This is a remix for the Infintyflow s1 Plus holder. It flattens the position, adds insert points on the left and right for the plug, open bottom for easy access to plug and Bluetooth switch.
