3,735 models
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
This Print-in-Place model of the famous Japanese offroader Suzuki Jimny is my second Print-in-Place vehicle with working suspension! The wheels spin too! The only thing you have to do after printing is to snip off a few tiny pillars that…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
Next model in the kit car series, this time it's a Jimny kit. The car once again has all wheels fully suspended. Assembly video: here
Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…
Boundary wire install tool robot mower - Verlegehilfe Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to install the boundary wire for your lawnmower into a groove. Groove can be done with the tool in my other models…
Dieses Toy ist ideal für die schule 1x Gear Right 1x Gear Left 2x Fidget_Ring Soviele Teile wie beschrieben Drucken
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
If you have any questions, complains, requests, or other comments, please let me know!
Tengen Uzui Demon Slayer 1st Iteration and 2nd Iterations.
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost. There is a file prepared for basic printers that do not support color changes within the same layer (similar to my example with an Ender 3…
I have been fascinated by stealth, tumblehome ship designs, of which the Zumwalt-class destroyer is one. I couldn't find a model of one that seemed to be suitable for FDM printing, so I figured I would give it a shot myself. The model…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
Nissan car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
A slim tray to store the discarded tiles. Refilling the bag has never been easier! Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You can also send me a tip on…
Description in English below Update 20.06.25 Kiste ohne Ausnehmungen hinzugefügt Update 08.05.25 Wieselburger Logos hinzugefügt Update 07.04.25 Griffe und Stopper für Montage mit Zylinderkopfschrauben M3x14 oder M3x15…
Dies ist eine kleine Weihnachtskugel, mit Teelicht Beleuchtung. Dies ist eine Erweiterung meiner ersten Kugel. User Bastel Basti hat den Vorschlag dazu gemacht. Gedruckt mit 10 Infill Infill ist mit Gyroid gedruckt, um das Licht besser…
English : Printed with the readable side laying on the print bed, in order to benefit from the good looking textured PEI sheet. Deutsch : Gedruckt mit der lesbaren Seite auf dem Druckbett liegend, um von dem gut aussehenden, texturierten…
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
Keychain created for my friends Suzuki Samurai. Single and dual Extrusion models. The height of the base plate is 2mm (for dual extrusion object arrangement). Print Settings Printer: Geeetech G2S Pro Rafts: No Supports: No Resolution: 0.2…
Nezuko Kamado Demon slayer Funko pop
This overlay for Azul's player board keeps the tiles in place. It covers all of the board and stretches over the edge of the board to keep it in place. There are two versions, one divided into several parts for small printers and one…
3d printable keycap thats very similar to razer brand keyboard keycaps.
Problem bei Wohnmobilen ist oft der sehr langsame Abfluss von Wasser in Spülen, Waschbecken etc. Es gibt dafür mittlerweile von einem Hersteller bzw. mehreren Lieferanten dafür einen Luftring zu kaufen, über den zusätzlich Luft in den…
Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…
Ein kleiner Serviettenring in Form eines Rentiers. Die Toleranzen sind ausreichend groß gewählt, so dass ein problemloses Zusammenbauen möglich ist. Ggf. ist etwas Sekundenkleber hilfreich. Wem die akzentuierte Nase zu aufwändig ist,…
Could not find a overlay to fit my printer. (Or that fitted properly) This overlay is 233mm x 233mm (Prints perfect on Creality CR-6 SE) There are 4 clips. The overlays fit inside the box. Print Settings Printer Brand: Creality Rafts: No…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD model). Mounts with one M8x 25mm allen head bolt. Simply remove the stock cover “bolt" and screw in the real bolt. Printed upside down with…
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Bei XL-Druckern mit mehreren Druckköpfen kommt es beim Drucken immer wieder vor, dass sich die Kabelclips an den Kabelpaketen der benachbarten Extruder verhaken. Mit den abgerundeten Clips wird dieses Hängenbleiben minimiert und das…
It is again the time to throw the heaters on, also the time to bleed the heaters. I have already printed something similar some years ago but unfortunately no longer found therefore I have tinkered a new one. No support needed, just part…
This was modeled off of a 1995 Suzuki Sidekick and should fit any vehicle with a similar dashboard center bezel. Some of the parts fit tightly and will need slight post processing. This was done to ensure everybody could print this even…
Lampe und Zubehör für die Parkside Lochwand. Für die Lampe benötigt ihr ein Alu-Profil für LED Strips mit Halteklammern. die Halteklammern werden mit einer M3 Schraube und Mutter an den gedruckten Lampenarmen befestigt. Lamp and Stuff for…
Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG, Perimeter=5 Gedruckt wurde auf der Vorderseite, mit der Schrift “118°” nach unten (siehe Bild). Keine Stützen notwendig. Es können bis zu 3 Magnete der Maße 20 x 6 x 1,5 mm…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
vytlačte ze zubní pasty vše
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
Summary Ein kleiner Schlitten für Multi-Color-Druck. Bestens geeignet für Adventskränze oder Tischdekoration. Die Traverse zwischen den Kufen kann, je nach Geschmack, weggelassen werden. Für diesen Fall habe ich eine Kufe ohne…
Drucke das Modell hochkant und aktiviere Support bis zu einem Überhangwinkel von 45°.
A buddy asked if I could make a secret stash that fits into the hollow handle of his Zuca disc golf disc cart. It fits perfectly, and for added tightness and water proofing, you could add a rubber O ring / rubber band. There is also a…
Use organic supports and support blocker
Print in PETG with tree supports or risk getting destroyed by Azure. In the images, the assembly order of the tendrils can be seen.
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Mit diesem Set können Sie in kurzer Zeit köstliche und nährstoffreiche Microgreens ernten. Es ist ideal für alle, die gerne frische Zutaten in ihren Mahlzeiten verwenden und Wert auf Eigenanbau legen. Egal ob auf der Fensterbank, dem…
Remix of Nezuko model with a base on the model to be able to print in two colors
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost.
Heizungs- /Lüftungsgitter – Ventilation Grille Deutsch: Design als Lüftungsgitter für Schreibtische oder Küchenarbeitsplatten wenn der Heizkörper überbaut wurde. Gedruckt in PETG-CF English: Design as a ventilation grille for desks or…
If you want the visor to appear, enable “Detect Thin Walls” If you DO NOT enable it, the visor will disappear (and therefore be “up” like the character normally appears.
I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…
Introduction Slightly modified from the EPO PV50 (as known in Japan) the PV50 Is a cult classic moped among the youth of Finland. Finland was the biggest importer of the PV50 when it was imported from 1981 up until 2002. Though it was…
Unsatisfied with the current state of grips for Zuca cart, I've decided to create my own that forgoes the need of any set screws/adhesive/tape and solely relies on an extremely snug fit but with the ability to be somewhat removed. I've…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
Hallo zusammen, ich habe mir hier einen Adapter für meinen Kärcher WD3P zum Bosch c35 System erstellt. Gedruckt in PLA mit meinem Prusa Mini+ Hello everyone, I have created an adapter for my Kärcher WD3P to the Bosch c35 system. Printed…
Capture the powerful and iconic Demon Form of Nezuko Kamado with this 3D printable STL model. This dynamic figure is perfect for fans of Demon Slayer looking to add a fierce and recognizable character to their collection or displays.…
Self-Customizable Sign for Labeling This blank sign is designed for you to personalize and label as you need! You can add your own text in several ways: After Printing: Simply write or draw on the sign with a marker or pen. Before…
Podvozky jsou remix stavajícího modelu. Vše lepit vteřinovým lepidlem. Přišroubovat podvozky dopuručuji šroubky o průměru 2mm. Dvojkolí jsem použil standardní vagónová s přůměrem cca. 10-11mm
To prevent the tiles in Azul Mini from falling out of the included bag, I've designed a container with a lid that doubles as a board for the factories. This replaces the cheap feeling included insert for the factory. No supports required.
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
With this track you can build space effective points fields to enter all your platforms of your train station. Optimiere dein Weichenfeld vor dem Bahnhof: mit dieser Bogenkreuzung kann eine 90° Kurve in eine Doppelweiche ausgebaut werden.
Diese Halterung ist für die Zusatzkühlung der Deye Hybrid Wechselrichter 8, 10 und 12 KW LP 1 - https://www.amazon.de/dp/B0CCRPXSZY?psc=1&ref=ppx_yo2ov_dt_b_product_details LP 2 - https://www.ebay.de/itm/403863623678 Netzteil -…
Mit diesen modifizierten Klemmen und dem modifizierten Arm können die Kameras direkt an den Target Vision 360 Lichtring angeschraubt werden. Es gibt keine Verbindung zur Wand oder zu einer Bodenplatte. Hält auch so bombenfest. Step 1:…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
This is a complete remix of the awesome Dual Mode Windup Car by Greg Zumwalt, which is no longer on thingiverse, but which you can find here: https://www.myminifactory.com/object/3d-print-dual-mode-windup-car-27061 One of my childhood…
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Hello, Bazukino, a toy soldier sculpture. Thanks for your download, enjoy the print!
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Support suggestions on the images.
Update vom 12.04.2023: Neue, kürzere Endkappen für DC-Hohlstecker-Einbaubuchsen, 90° versetzt ( https://www.amazon.de/gp/product/B093FTFZ8Q/ ) für alle Versionen Update vom 13.03.2023: Neue Endkappen für DC-Hohlstecker-Einbaubuchsen (…
Tengen Uzui Demon Slayer Chop Stick Holder. G-code version includes organic supports. The empty layers warning can be safely ignored it's the tip top of the sword on the last layer. Action Pose can be found here: Tengen Uzui Demon Slayer…
In den 90ern waren sie topmodern und von Architekt Luigi Blau entworfen. Blau wurde 1945 in Mistelbach geboren. Nach seinen Plänen wurden unter anderem das Burgtheater umgebaut und das Theater Ronacher in Wien renoviert. Er gilt als einer…
Einkaufswagenchip zum herausziehen, auf Wunsch mit oder ohne bestimmten Namen
Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay/Facebok sellers that stole the design without attribution! If you use these files, I would…
Update 4: Added ddifferent versions of grid spacing Update 3: Modification for skimmer 212x204mm based on request Update 2: Optimized overall dimensions to fit MK3 printer Update 1: Optimized wall thickness to 1,2mm and added 1,6mm…
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
A simple stackable growing pot. Project file (Autodesk Fusion 360) also included. I would be very happy about your support: : https://www.paypal.com/paypalme/tinkerfun Tinker.Fun on YouTube: https://www.youtube.com/tinkerfun Tinker.Fun on…
Dekorativer Schriftzug
Makita Oberfräse zu Führungsschiene von Makita / Makita Router to Makita guide rail Same like my version from Makita Oberfräse zu Führungsschiene Festool / Makita Router to Festool guide rail Category: Machine Tools
The source marked this model as adult content.
I've created a V2 that has a better design and left and right sides. https://www.printables.com/model/451844-suzuki-jimny-cup-holder-v2 Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD…
Recommended settings tested with Elegoo Neptune 4 Plus printer on PLA material and Orca Slicer: Hot bed first layer 65°C and following layers 60°C. Use 0,4 mm nozzle. Printing temperature 210°C. Infill patterns: Rectilinear. Top and…
The famous nezuko box in demonslayer. Upside is open. Use this for penbox. Suppors in slicer are needed. Have fun :) All the 3D models of NemoMK2・Cults (cults3d.com) I'm selling more 3D printable things, take a look :)
Simple but very nice print, just print and put Nezuko on the stand
This is a faithful reproduction of the Suzuka International Racing Course. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple…
It's the sword from the kazuha's quest.
An Azul factory with hinged constrainers for flipping tiles into the central pile. Cups need to be printed with supports. The cardboard discs that come with the boardgame should fit inside snuggly.
Einfacher Adapter um AA Batterien in Geräten für Baby-C Batterien zu nutzen. Die Hülse kann über die Akkus gesteckt werden, und in den BABY-C Schacht gelegt werden. Ist nur eine Notlösung für den Fall, dass gerade keine Passenden Akkus…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
