1 / 6
IKEA Brogrund Mounting Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Brogrund Mounting Adapter for use with up to two Tesa Powerstrips (80x20mm) or double sided tape.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I didnt't want to damage the tiles in my bathroom, so i made this mounting adapter for the IKEA Brogrund toiletpaper holder. I think it will fit other products from this series as well.
You can use it with up to two Tesa Powerstrips (80x20mm) or other double sided tape.
- The baseplate should be printed with support, to get a nice surface to put the Powerstrips onto.
- Put the strips onto the baseplate and mount it to the wall
But be careful and check the orientation of the holder before glueing it to the wall!!! - Now mount the holder to the baseplate and turn the screw tight.
- Next put the cover over the holder and push it into position with a bit of force until it clicks into it end position.
Have fun!