Articulated Modular PiCam Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated modular camera mount for the Raspberry Pi Camera.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 105
- Wydruki
- 3
- Wyświetlenia
- 763
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Articulated modular camera mount for the Raspberry Pi Camera. I made this to mount a PiCam to my Ikea Lack enclosure. The brackets screw together to form modular articulation links allowing flexible orientation in 2 axes. Each bracket can attach to another bracket with M3 screws with 8 mm spacing.
Tested with the PiCam v2.0 camera.
Uses the following M3 hardware:
- M3 hex nuts - 3x per nut_side_bracket
- M3x25 cap head screws - 1x per articulation joint
- M3x8 cap head screws - 2x per bracket to bracket joint.
I used this model to manage the ribbon cable in my Lack enclosure: https://www.prusaprinters.org/prints/100682-customizable-ribbon-cable-clip-with-screw-attachme
Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: eSUN PETG Black
Notes:
Each bracket is designed to print on its flat surface without requiring supports, raft, or brim.
If you liked this model, please consider buying me a coffee!
