Articulated Modular PiCam Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated modular camera mount for the Raspberry Pi Camera.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 105
- Makes
- 3
- Views
- 763
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Articulated modular camera mount for the Raspberry Pi Camera. I made this to mount a PiCam to my Ikea Lack enclosure. The brackets screw together to form modular articulation links allowing flexible orientation in 2 axes. Each bracket can attach to another bracket with M3 screws with 8 mm spacing.
Tested with the PiCam v2.0 camera.
Uses the following M3 hardware:
- M3 hex nuts - 3x per nut_side_bracket
- M3x25 cap head screws - 1x per articulation joint
- M3x8 cap head screws - 2x per bracket to bracket joint.
I used this model to manage the ribbon cable in my Lack enclosure: https://www.prusaprinters.org/prints/100682-customizable-ribbon-cable-clip-with-screw-attachme
Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: eSUN PETG Black
Notes:
Each bracket is designed to print on its flat surface without requiring supports, raft, or brim.
If you liked this model, please consider buying me a coffee!
