Kingroon Dry Box Top Feed Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better Filament guide that doesn't suck the ptfe tubing into the box.
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 2
- Wyświetlenia
- 222
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Update: 9/28/24: I redesigned this since I had an issue that the opening was still too big and the PTFEtubing was pulled through it. I made the diameter of the opening smaller than the PTFE tubing.
I Purchased the Kingroon filament dry box from amazon a month or so ago because I print in my basement and wanted to keep dust and humidity down from messing with an active filament spool. The box is not bad but the ptfe fittings are terrible. Both side and top fittings will allow the ptfe tubing to be pulled into the box causing a jam and making your printer ghost print.
If you do not use ptfe tubing this isn't an issue for you.
I designed this to hold the tubing and it fits into the top of the dry box hole so you don't have to use it with the metal one it comes with.
This was printed on a K1 Max. I suggest if you have a high speed printer to slow down your printer around layer 70-74 from 100% to about 10%. My printer was moving so fast it kept detryoying the top part and it looks much cleaner.
Print with support around the base under the top lip. That's the only place it need it. You can do automatic support or just paint it on.
This is the dry box I ordered: https://www.amazon.com/gp/product/B0B77DWHK6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
I paid $29 for this and at the time of this posting its on sale for $19.99