1 / 1
Zulkit 5.9 x 3.9 x 2.8 inch Enclosure Magnet Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate that can be screwed to the back of the enclosure with the included self-tapping screws.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
This plate can be used with the included self-tapping screws to mount one or two magnets on the back. Any kind of circular magnet with a hole in the middle will work, as long as you can use an M5x8 bolt, nut, and washer. I'd also use thread-lock.
OpenSCAD file included, you can easily update this for any enclosure with similar self-tapping screws.
PLA is an absolute no-go here, it will easily warp/melt in the sun. Use PETG or better.
Enclosure: https://www.amazon.com/gp/product/B08KY7VK8W
