1 / 1
Zulkit 5.9 x 3.9 x 2.8 inch Enclosure Magnet Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plate that can be screwed to the back of the enclosure with the included self-tapping screws.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 40
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This plate can be used with the included self-tapping screws to mount one or two magnets on the back. Any kind of circular magnet with a hole in the middle will work, as long as you can use an M5x8 bolt, nut, and washer. I'd also use thread-lock.
OpenSCAD file included, you can easily update this for any enclosure with similar self-tapping screws.
PLA is an absolute no-go here, it will easily warp/melt in the sun. Use PETG or better.
Enclosure: https://www.amazon.com/gp/product/B08KY7VK8W
