1 / 1
Desk Leg Extension (21x21mm x 50mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is scaled to rise Jysk desk by 5cm, should fit any desk with 20-21mm square legs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I have printed it with PETG 15% infill and 3 walls. I recommend minimum 35% infill just to be sure, also if your desk is heavy or have multiple displays or more load increase it.
So far it is stable, it holds a 34" display, phones, mic, etc. It took about 4 hours to print with A1 mini.