1 / 6
Mount for Genie G3T-R Garage Door Opener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted our garage door remote that stays in the house to look more like a fixture.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted our garage door remote that stays in the house to look more like a fixture. This case turns the Genie G3T-R Garage Door Opener into a wall-mountable button.
Use #6 or #8 screws to mount it or glue MagnetAddon.stl to the base and stick a magnet in there to mount this on your refrigerator. I used 1 inch magnets from Home Depot.
Print instructions
Supports: No
Resolution: .3
Infill: 15%