Mammoth - Dual 5015 Part Cooling for CHC Pro and E3D V6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight powerfull part cooling system. Easy to print, assemble, and maintain.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Lightweight parts cooling system with two powerful 5015 radial fans and E3D radiator mount. The ducts provides excellent layer cooling for high flow printing and ability to print steep overhangs and long bridges. CHC/CHC Pro and V6 heatblock support, Volcano will theoretically fit, but im not tested perfomance with it.
BOM:
- 2x Heat insert m3x6x4.6
- 1x Heat insert m3x4x4.6
- 2x Screw m3x6
- 4x Screw m3x15
- 2x Screw m3x20 (or 42mm m3 stud and 2x m3 nut)
- 1x Screw m3x30
- 1x 3010 axial fan
- 2x 5015 radial fan
Print Settings
Supports:
Only needed for “mount_frame” part
Resolution:
0.2 for all parts
0.15 for “ducts” parts
Infill:
100%
Filament:
PETG if you use open printer.
If you use enclosed printer:
PP-GF30 for “radiator_cooling” part,
ABS-CF15 for other parts.
Assembly:
The parts shown need to be glued together with superglue or with dichloromethane:
Changelog:
2024.09.25 - Optimized some parts.