MK4S LCD adapter for original enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design objective: Solid mounting brackets with hidden fasteners. Cover design to compliment existing Prusa LCD design.
- Ocena
- 4,938 / 5
- Polubienia
- 71
- Pobrania
- 459
- Wydruki
- 13
- Wyświetlenia
- 1864
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I found it easier to assemble the cover to the LCD while printer was powered off and wires unplugged from the LCD. Files to be printed with no supports needed. The cover needs to flex when being pressed onto the LCD. Slide the thick side on first, as this is sliding on the thin side will flex around. See picture of the flexing to expect with the cover half on. Next, Insert one M3nS nut into the cavity on each bracket X 2. It is a good idea to test fit the M3x6 bolt into the installed nuts. Now line up the key guide on the bracket and slide into the cover. Using the Prusa supplied special screws 3x12sT x 4 fasten the brackets to the LCD. This will compress the cover firmly onto the LCD. Finish with attaching the LCD and cover to the exterior of the Prusa enclosure with the two M3x6 bolts. Enjoy!