Creality K1 Bikini for Booty Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic cooler design for K1 with BootyCallJones' linear gantry
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 228
- Wydruki
- 3
- Wyświetlenia
- 1855
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for a 4020 (stock) fan on the linear rail gantry by BootyCallJones.
I was fanatical about this design. I wanted to make a lightweight cooling duct that improved the cooling and was easily tuneable.
I would suggest printing this in ASA for heat resistance. I used the organic tree supports from the bed only and only for more than 25 degree overhangs. The walls are 0.8mm, so it should be sturdy when printed with a 0.4 nozzle at 0.2 layer height.
If you do some testing and have some suggestions, please let me know in the comments. Thanks!
Update 10/2/2024: I angled the front instead of having it rounded to remove the overhangs for a cleaner print.
Update 10/20/2024: Added new stock version as new model: https://www.printables.com/model/1046353-creality-k1-bikini-for-stock-cooler
https://ko-fi.com/gladfox