SpraySwab - Alcohol Spray Bottle & Cotton Swab Storage System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple pocket-friendly holder for cotton swabs and cheap 1oz spray bottles you can get from Amazon.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a convenient little holder is especially useful for when you need to clean some electrical contacts or getting the gunk out of some hard to reach places.
It looks like the spray bottles I used are already unavailable, but here's the link to em.
https://www.amazon.com/dp/B07W5MY9L4/
They're the 1oz plastic ones and there are plenty of other listings out there. If they're about 27mm in diameter they'll slip in just fine.
3mf provided for those with multi-color support. Print it at 0.2mm layer height or with adaptive layer heights so the retaining geometry can get a bit of detail.
This was a bit of an experiment at using spherical ‘dots’ for retaining a cap and it works pretty decently for my uses.
If anyone's interested I'm willing to revisit this project to make variants with different securing mechanisms or to make it gridfinity friendly.
