Creality K1 Upgraded LED Light Strip Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in DIY upgrade bracket for K1 Light Bar. Over 300% more light with factory fitment and styling.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tolerances are 0.1mm so be sure your printer is tuned accordingly. This design should ideally be printed in a temperature resistant material for longevity. I would recommend PETG or better when using the enclosed build volume or running lights at full power for extended periods of time.
The White LED strip used is from an LED tube shop light and measures 10.2mm wide by about 250mm long and has 20 individual 2835 SMD LEDs. The stock strip only has 6 so this mod should over triple the light output.
For mounting hardware this design uses 2 M2 x 5mm countersunk screws installed into the existing tapped and unpopulated holes on the interior of the Creality K1 frame. DO NOT OVERTIGHTEN (not sure why these holes exist but they work great for this mod) See the animation above or download the .step file for installation orientation.
(Design may be compatible with Creality K1C but is untested.)