RC Boat CozyRC Mini Mono
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boat hull based on CozyRC's Mini Mono plans. 500mm long hull it is an easy entry build capable of high speeds.
- Ocena
- 5 / 5
- Polubienia
- 246
- Pobrania
- 2748
- Wydruki
- 6
- Wyświetlenia
- 14 139
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Boat hull based on CozyRC's Mini Mono plans, from Youtube Channel CozyRC.
500mm long hull it is an easy entry build capable of high speeds.
Dirk Jan (CozyRC) was a integral part of this design adaption, along with other YouTube members aware of the project who contributed with their suggestions.
This model was teste printed in PLA and PETG, with the best results achieved in PLA, 0.4 nozzle and 0.2mm layers.
I strongly recommend the boat hull to be epoxied or gel coated with a thin product suitable for RC builds. The epoxy will add strength, repair any aesthetic imperfections and “increase” the PLA resistance to temperature. That said… avoid leaving it inside a car under direct sun! (common sense isn't always common)
Parts list:
https://drive.google.com/file/d/1KJ7w50VnKX5u0Xzpfv7bfFLpldjvLJiR/view
Any questions and/or suggestions are welcome, just drop me a message.
Please like the model and post your builds.
Enjoy and subscribe to Cozy's channel and enjoy his build video of this model.
My first water test with a 3S LiPo.