Wii Hard Drive Mount (Horizontal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.5" hard drive mounting solution, with optional drive cover
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Secure saddle for a typical 2.5" hard drive on a RVL-001 Wii. Simply print 2x of these brackets, and use M3 screws to attach to the threaded holes on the bottom of the drive. There is also a (decorative) top cover for the drive. One version has the ‘Wii’ text on it, if you have a multicolor printer.
There are 2 backet versions included, depending on if the top covers (for GC controllers and memory cards) are closed or not. If they are there, and closed, then this adds ~2mm to the width.
No supports are needed. I printed this in white PC-PETG blend, but any material should be fine.