Dell XPS 700 / 710 / 720 SSD Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter should fit all cases as its the standard width of a 3.5" hard drive. The only difference is the holes are…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter should fit all cases as its the standard width of a 3.5" hard drive. The only difference is the holes are slightly enlarged to allow for the pins on the standard UJ175 hard drive caddies in my Dell XPS 710 case.
I made this adapter as all other brackets that I found do not lift the SSD up enough to fit right angle SATA cables to them in the Dell XPS case./
There are two versions the one I used and then another I made after that which uses less filament.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
No
Supports:
No
0.15
Infill:
20%
Category: Computer