315 modeli
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
The model allows you to quickly and easily pack the M720q mini computer into an enclosure to install it on a 10u rack.
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
Update 2023-07-03: I'm updating this model slightly after testing it in the real-world for a while: Added higher rails to each side to better support the back-end Switched to PETG as the heat from my rack caused the PLA to sag over time.…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router. It is a remix of TP-Link 1U rackmount housing for ER7206 router by calipsoii. I changed the backstop and strengthened the frame. Parts…
Recreation of 720s rim as close as posible for LEGO technic enthusiasts. Compatible with tyre 81.6 x 44 ZR Printing options: Printing outter and inner part separately. Outter (part with spokes) print with supports Printing the combined…
This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in…
This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…
i printed all parts out of petg, and just printed out the face plate in two parts then used it as a template to cut it out of aluminum, youll also need some m3 brass press in nuts for back plate and shifters
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Bowl with Daoist immortals. China, Jingdezhen, 1700–1720
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
This is designed to work with flexible TPU filament only. Recommend printing with 4 perimeter walls, 4 bottom and top layers, and 13% rectilinear infill. No supports required. Use a thin-tip Sharpie to darken the letters after printing.…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
A way to dry bottles of eg Thermos, 720 Dgree and so on. If the print should cause problems, simply turn the stand and print the other way around. Eine Möglichkeit, Flaschen von z.B. Thermos, 720 Dgree usw. zu trocknen. Falls der Druck…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Simple case for Sony wireless headphones. Custom fit for Sony WH-CH720N but others will also work. For headphones where only the ear shells can rotate. Its a pressure fit for the lid, so tight tolernaces are needed.
Two angled parts for the Rugged Extreme Tablet to create a handle. You need a few extra Materials for this. Firstly, a rectangular tube with 15x15mm and a wall thickness of 1mm. Cost: ~5€ for 1000mm My tube needed to be cut to a length of…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
this uses 2 screws to retain each module. it fits the standard 1u rack with little adjustment. i was able to print it on my ender 3. I used like 10 walls so that it was a solid part. it's printed in two parts to fit an ender 3. you will…
This is a cover for the Intel X520-DA2 on the M720q. It probably also works for the M920q but I don't have one. Here is the link for the OnShape
---> English Lab Rax - 10" - 1U - Lenovo M910q/M720q: Lenovo M910q 10" 1U Mount with 2 mounting screws. Edit (09,20,2025): Added support for the backside I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U -…
Edited J3ff's R710 stand to fit R720 side profile. With two of these, you can make the Dell R720 stand in a "tower" computer style, reducing the footprint needed for the server.
A bracket to hold a X540-T2 in place on a m720q
10 inch rack compatible mount for the Lenovo m720Q will (Likely) fit any M700 series Lenovo. Comes with Keystone mount for easy networking. Not recommended to be printed in PLA as the mount will split around the rack-ears. Higher infill…
Simple case & snap-on lid for the RTL8720DN BW16 board. I couldn't find any other models available for this board, so I made one! The snap-on lid press fits snugly, and has supports to help hold the board in place. Pins are exposed on the…
24/08 V5 added. All now printed and fitting 26/08 V6 Rear added width guides. 26/08 Added Shelf Support. 2 M4x4x6 heated insert. 2 supports needed each side and something to bridge between to make a shelf.
Description This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back…
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through. And I increased its height to make it more stable when there are a lot of cables connected. Standard PLA printing is sufficient.
This is a remix of "Logitech C615 Webcam Privacy Shutter" by fasteddy to fit the Trust 720p webcam
Custom Bracket for Yeston RTX 3050 Low profile card to fit Lenovo M720q. Allows for easy closing of top part of case. Printed in 100% infill PLA+ or can use PETG.
puede que los ejes no funcionen😅 si es así coméntenlo y lo arreglo en una segunda versión😀👍
Adapter to connect your Festool vac to the Kreg 720 pocket hole Jig. I used Petg but might work with PLA. Also added the fusion 360 file in case you want to revise anything easily.
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
This is a baffle for the rear PCIe slot of Lenovo Tiny PCs including the M720q and others. The original baffle is from a user on Thingiverse by the name of simbaja and can be found here . I took the original model and tweaked it to my…
This model is compatible with the lego system.
Use tin Snips to cut out the top of the lid and glue the overhang. I found a significant drop in CPU/GPU temp with the lid off vs on, having this vent should get the required result. The version you need for the Lenovo Mini is: 155x140
I took inspiration by glancing over the search results on printables with the search term “m720q” for 30 seconds and decided to do it myself, because I couldn't find exactly what I wanted. The most important feature to realise were the…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
German (English Text below): Hier ist ein Nachbau des originalen Flaschenverschluss-Clip, zum schließen der 720°DGree Flaschen. Ich habe ihn an der 1,5 Liter “uberBottle” getestet. Sollte aber an den anderen Flaschen ebenfalls…
Mclaren Mini Wall Sculpture Layer height: 0.2 - 0.3 mm Enjoy!
I wanted to mount my ThinkCenter 720q mini pc to the French cleat wall in my den. Not finding anything suitable, I designed this one in Fusion 360 and printed it. Does exactly what I needed. It could be a bit tighter, so if it is printed,…
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
Materiał: PLA, ABS, PET-G Podpory: Tak Uwaga: Zamontuj w pierwszej kolejności dyski twarde za pomocą śrub stożkowych M3-6mm. Dla dwóch tylnych śrub M3-10/12mm potrzeba delikatnie rozgiąć kratkę, można zastosować śruby M2,5 (bez rozginania)
Steps to install whole setup into the Lenovo M720Q Minipc: Print this model with a sturdy material like PETG Take off side/top cover of minipc (screw on the back and slide towards front IO) Take out 2.5" drive holder by pressing down the…
Yeston updated there RTX 3050 LP model and flipped the HDMI and DPI ports. This is the updated version for the change.
This is a orange (any colour you like) mclaren 720 S fully ai generated and you can remix and colour it also post your own colour or add stuff to it if you like but remember to add credits please, make with supports for the bottom of the…
A quick & dirty remix of PwnCNC's Ultimate Festool Cleantec Adapter in order to connect my Kreg 720 pocket hole jig to my Festool CT26. This one is specifically sized for the Festool D27 / 27mm hoses. Prints without support. I recommend…
This is a simple 2.5" SSD sled for a Dell R720 server. I found a couple of models for other Dell servers, but none of them would work in my hot swap bays. This is a minimum working example, so feel free to remix/improve it. Printed on an…
To use, you'll first need to unscrew the existing camera base and re-use the screws from there.
Just a quick mount to keep a leaf blower out of the way on the wall
Print all parts flat at bed. No support material needed. All combs slides in place. When all combs are slided at place, make sure they are aligned well, and glue them through the slide slits with CA glue. Glue the “ base under” on base,…
You crashed your drone? Have no fear, here is a whole set of arms for your drone. I have printed these in PETG and they survive more than the stock ones, you may need new screws I re-tapped mine for 2-56 pan head screws since I have a…
I created this model after a friend's request for a wall-mount for his TP-Link M7200. We only found two models at Thingiverse regarding the TP-Link M7200: This original one from by Volkvanmyn25…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na holící strojek Philips MG7720 s možností připojení nabíječky. Vytištěno s tryskou 0.6,…
Accessory trays for Philips MG7720/15 - MG7745/15 shavers
Protection pour la tablette Samsung Galaxy Tab S5e (modèles SM-T720 et SM-T725). Découpes pour l'accès aux différents boutons et prises. (il manque des découpes pour les haut-parleurs et le micro, mise à jour à venir…) La version PETG est…
Intro Designed to be printed face down. Holes included for airflow. Sturdy connections to card and case provided to ensure minimal risk of breaking during installation. No modifications to case required. Print Settings 0.6mm 10% infill No…
>> This mod may void the warranty! << >> Modify the radio at your own RISK! << Inside IC-7200, the power terminals are inserted in the main PCB. Modify the cord with caution.
UPDATE: Checkout Kroll Fu's remix if you desire smoother look. 3D scanned the mouse and made this shelf. Fits into standart hollow inserts for Honeycomb storage wall. The fit is kinda loose, so other similar mice might fit. Best to print…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
Please check the hole spacing in the drawing! If your hard drive has a different spacing, the FreeCAD source file is included. You need to remove two standoffs, the screw between them, and the internal speaker. Attach the mount to the…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
Dell PowerEdge R720 3.5'' Disk Tray with 2.5'' Disk Adapter This model is designed to accommodate 3.5'' disk bays in Dell R720 servers. The model also has 3.5'' to 2.5'' disk converter adapter. So, yo can use any 3.5'' or 2.5'' disk with…
This is a custom-designed charging stand for the Philips MG5720 trimmer that does more than just hold your device. It features a unique lever-actuated mechanism that lets you hide or reveal the charging connector , helping you avoid one…
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
here is a approximately ⅓ scale replica of a alertronic AL-7200. measurements aren't exact. HARDWARE: 216 M3 by 8 screws (better be prepared!) 2 4mm eyebolts 24 2" speakers (used ones with frames) PRINT INFO: horns - 20% infill, no…
This is a remix of jrieck's Disco Light Remote Holder resized to fit a Furrion DV7200 RV stereo remote. This model will hold a remote 56mm wide x 7mm thick.
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
Note: Please print the STL in the "Long Plug+Boot" folder to avoid issues with RJ45 Plugs being too long. The version you see in the pictures has a flaw i only noticed after taking said pictures: Ethernet cables with a maximum Plug + Boot…
Modeled in Fusion. Designed to be printed face down.
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through and for a 100mm VESA mount. I also increased its height to make it more stable when lots of cables are connected. And you can clip it to a Ikea Skadis peg…
The impeller of our leaf blower/vacuum broke after ingesting a few too many sticks. With replacement parts no longer available, I attempted to recreate it by first modelling a slice of the part which I used to test the clip in blade…
Lenovo ThinkCentre M920q / M920x / M720q — Vented Extended Cover with 120mm Fan Drop-in replacement for the standard side cover, adding a full-length single-slot PCIe card slot (up to 175mm) and a 120mm top-mounted cooling fan. Designed…
This 3D-printed mount is specifically designed for the Logitech C270 webcam and offers an adjustable mounting piece that holds the webcam securely and at the desired angle. Purpose Ideal for desk setups that require additional height or…
A simple vertical stand for a TP-Link Omada ER7206 Router that provides stability and airflow into the vents on the end (now down) side of the router. Prints upside down without supports. The space for the router measures 35mm x 130mm and…
Fujitsu s720 rack mount 19", or similar model. Simply mount in rack 19'. Version 1. Need add a mounting hole.
This model is compatible with the lego system.
I 3d Scanned the 2.5-inch drive blank to get the locking part, cleaned it up, and remixed https://www.thingiverse.com/thing:4866109 for the SDD drive caddy. I merged them together and got this as the final product. It slides right into…
Model of an old John Deere harvester
Support to adapt the Gk7205V200 camera to an FPV test drone.
A comfortable top handle with no sharp edges, designed for maximum ergonomics. The handle is slightly angled forward to
