1 / 5
IKEA Skadis Universal Hook Holder for LIDL Parkside Magnetic Tool Bar/Strip — zdjęcie 1
1 / 5

IKEA Skadis Universal Hook Holder for LIDL Parkside Magnetic Tool Bar/Strip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This project/idea contains four models. Two models each for horizontal or vertical mounting the Lidl Magnetic Strip/Bar.

Ocena
4 / 5
Polubienia
22
Pobrania
72
Wydruki
0
Wyświetlenia
758
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

IKEA Skadis Universal Hook Holder for LIDL Parkside Magnetic Tool Bar/Strip
 

Origin story: This is my first project here. I had bought a few of these magnetic holder strips from Lidl in Germany and wanted to attach them to my existing Ikea Skadis system without screws and ideally also with the Universal Hook System, which I also use for all other holders, etc.

Then: This mounting system is based on and uses the modular Universal Hook System. There are four models. Two models each for horizontal (*-right | *-left ) or vertical (*-up | *-down ) attachment/mounting.
 

Dimensions (LxWxH)

ikea-skadis-magnet-holder-left-01: 24,5 x 13,5 x 25,0 mm (100% scale)
ikea-skadis-magnet-holder-left-01: 33,0 x 20,0 x 63,0 mm (100% scale)
ikea-skadis-magnet-holder-right-01: 33,0 x 20,0 x 63,0 mm (100% scale)
ikea-skadis-magnet-holder-up-01: 28,0 x 22,0 x 63,0 mm (100% scale)
ikea-skadis-magnet-holder-down-01: 28,0 x 22,0 x 63,0 mm (100% scale)
 

Side note: The model is still in a test phase for me. I am still testing different variations in terms of stability and form factor. So please take this into account when printing and using.

Tagi