Creality K1 Bikini for Stock Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic cooler design for K1
- Ocena
- 4,833 / 5
- Polubienia
- 120
- Pobrania
- 592
- Wydruki
- 10
- Wyświetlenia
- 3842
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was fanatical about this design. I wanted to make a lightweight cooling duct that improved the cooling and was easily tuneable.
I would suggest printing this in ASA for heat resistance. I used the organic tree supports from the bed only and only for more than 25 degree overhangs. The walls are 0.8mm, so it should be sturdy when printed with a 0.4 nozzle at 0.2 layer height.
If you do some testing and have some suggestions, please let me know in the comments. Thanks!
Update 10/2/2024: I angled the front instead of having it rounded to remove the overhangs for a cleaner print.
Update 10/20/2024: Added stock version as a new model.
https://ko-fi.com/gladfox