LayersFactory
Zgłoś model
1 / 9
Adjustable Digital Thermometer Stand — zdjęcie 1
1 / 9

Adjustable Digital Thermometer Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Other House Equipment
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

Digital thermometer stand for the popular Chinese thermometer, with the adjustable angle.

There are two versions of the base:

  • With two pegs for wrapping the sensor wire.
  • Plain base with no pegs.

    Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.20

Infill:

20%

Post-Printing

Push the two clips firmly into the base, all the way in. They should fit snugly.

  • If it is too much play, add a drop of super-glue.
  • If it does not fit, just file/sandpaper the clip a little bit. Attach the front to the clips, and be careful not to break it. Use ABS, PET or FLEX (PLA might break while mounting the top part to the stand).

IMPORTANT: First connect the front frame with the base, andthen insert the thermometer. The front frame will be easier to bend without the thermometer attached, so it is less likely to break in the process!

Category: Household

Tagi

holderstandmountbracketfixturethermometerthingiverse3dprinterenclosuremountingbracketprinterenclosurethermometerholderdigitalthermometerthermometermountfixturesthermometerenclosurethermometerclipthermometerstand