1 / 9
Adjustable Digital Thermometer Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Digital thermometer stand for the popular Chinese thermometer, with the adjustable angle.
There are two versions of the base:
- With two pegs for wrapping the sensor wire.
- Plain base with no pegs.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.20
Infill:
20%
Push the two clips firmly into the base, all the way in. They should fit snugly.
- If it is too much play, add a drop of super-glue.
- If it does not fit, just file/sandpaper the clip a little bit. Attach the front to the clips, and be careful not to break it. Use ABS, PET or FLEX (PLA might break while mounting the top part to the stand).
IMPORTANT: First connect the front frame with the base, andthen insert the thermometer. The front frame will be easier to bend without the thermometer attached, so it is less likely to break in the process!
Category: Household