GEN2 Under Table Rails - 165
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount GEN2 under any table or desk. Dovetail rails for 165-length cases · swap drawers in seconds with QuickLock.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 553
- Wydruki
- 1
- Wyświetlenia
- 1251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MOUNT GEN2 UNDER ANY TABLE OR DESK
GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds with the QuickLock release.
Each rail mounts flat to the underside with countersunk wood screws and carries the dovetail + QuickLock interface used across the GEN2 system.
Rails come in 1W, 2W, 3W, and 4W widths — print only what you need, or mix widths to match your run.
QUICK DETAILS
Collection: GEN2 165
Fits: 165-length GEN2 cases
Available widths: 1W, 2W, 3W, 4W
Mounting: countersunk wood screws into any table, desk, or shelf
Interface: GEN2 dovetail rails + QuickLock
Additional hardware: wood screws (see Hardware)
HOW IT INSTALLS
Step 1 — Hold the rail flat against the underside of your surface and mark the mounting holes.
Step 2 — Drill pilot holes, then drive countersunk wood screws up into the surface.
Step 3 — Slide a GEN2 case onto the dovetail until the QuickLock clicks.
Step 4 — To swap or rearrange, press the QuickLock and slide the case out.
HARDWARE
Includes affiliate links that help support the project.
• Countersunk wood screws, #6 — buy on Amazon
• Countersunk wood screws, #8 — buy on Amazon
• A drill bit slightly smaller than your screws, for pilot holes
• Pen, marker, or scratch awl to mark the hole locations
• Filament: PLA or PETG
WORKS WITH GEN2 165 CASES
Any 165-length GEN2 case — Classic or Decor drawers — mounts to these rails. Build a full run and swap drawers between rails anytime with QuickLock.
LET THE FREE GEN2 PLANNER HANDLE THE DETAILS
Build your layout in the free GEN2 Planner — it automatically figures out the parts and rail arrangement you need, creates a complete parts list with download links, and generates a custom step-by-step 3D assembly guide for your exact setup. Whether it's your first GEN2 build or a full wall of storage, it saves you the guesswork.
👉 gen2planner.jerrari3d.com — free to use, right in your browser
SUPPORT GEN2 AND UNLOCK MORE
Join the Jerrari Club for member-exclusive models and early access to upcoming GEN2 releases — every membership helps fund continued development, from new models to free tools like the GEN2 Planner.
Looking for a one-time upgrade instead? Explore the premium faceplate collections.