Semi-electric curtain track wall mount bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to wall-mount both electric curtain track and manual drape rail.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Behold a bracket. This one is intended to hold electric curtain track with manual drapes. European stile brackets have intricate latch system that hold the track so if you buy cheaper Asian version you likely wont find a way to mount it to wall…esthetic one anyway. Here comes 3D printing. The track I got is secured with M4 screws. So no small features which would be difficult to print or could not hold the weight are required.
The bracket has 6mm hole for and anchor screw. I've used 6x50 anchor with 6x60 screw which should hold medium weight curtains. That is if you install at least one bracket per 1 meter. If you aim for heavy fabrics use more brackets or adapt to your wall and anchor load capacity.
You need M4x16 screw to grip the track - again check if yours is compatible. It is important to pick a screw with hex groove(and sunken head) as limited space restricts methods of inserting the screw. Right angle hex tool is best for this situation. Drape rail is secured with M3 screw.
Printing recommendations:
- don't use PLA as it deforms under pressure. Light flex PETG has will help to take rough handling. So prefer PETG.
- at least 4 perimeters
- at least 50% infill
- print on side with support in center cavity (hint in photos)