Siboor Voron AWD Trident Bambu Nozzle Brush

Simple nozzle brush that mounts to the bed frame.
Needed a way to wipe before cartographer does it z offset using touch.

 Brush used : https://s.click.aliexpress.com/e/_mMPr8W8

Print in ABS or ASA 

Need 3m x 16mm long bolt and your choice of slip in nut 

Edit Variable_start X and Y and Z if needed ( This is for 300mm Bed ) 

I stuck the brush as close as the bed as i could so your variable_start_Y could be different then mine. i also use .5 for variable_start_z. But i would start with 8 to make sure its brushing in the right area first then bring down your variable_start_z to get the nozzle as deep as you like in to the brush. 

##############################################################

[gcode_macro CLEAN_NOZZLE]
variable_start_x: 228
variable_start_y: 307
variable_start_z: 1
variable_wipe_dist: -35
variable_wipe_qty: 10
variable_wipe_spd: 200
variable_raise_distance: 20

gcode:
 {% if "xyz" not in printer.toolhead.homed_axes %}
  G28
 {% endif %}

 G90                                            ; absolute positioning
 ## Move nozzle to start position
 G1 Z6
 G1 X{start_x} Y{start_y} F6000
 G1 Z{start_z} F1500

 ## Wipe nozzle
 {% for wipes in range(1, (wipe_qty + 1)) %}
  G1 X{start_x + wipe_dist} F{wipe_spd * 60}
  G1 X{start_x} F{wipe_spd * 60}
 {% endfor %}

 ## Raise nozzle
 G1 X282 Z{raise_distance}

##########################################################