SBCD - Multiboard Stealthburner Cartridge Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach Stealthburner Hotend Cartridges to your Multiboard!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you, like me, have taken the strategy of just having some Stealthburner Hotend Cartridges pre-built and ready to go, instead of trying to perform a hasty nozzle-swap, then you too need somewhere to keep your spare cartridges.
This is version 2 because I had an unpublished (crappy) one for HSW I was never truly happy with. When I decided to upgrade my wall from HSW to Multiboard, this became necessary, and I am quite happy with how it turned out.
- Designed to use 2x 13mm Small-Thread Flathead T-bolts.
- No Supports! Easy to Print!
- Friction fits to the back of any Stealthburner Hotend Cartridge!
- Holds the cartridge at 7.5 degrees, for fancy displaying purposes.
NOTE:
The friction fit piece that clicks into the back “rectangle” of the cartridge is sized for a standard cartridge. Some cartridges us a different shape, or a shorter rectangle, notably the cartridge for the MicroSwiss MK8 Hotend. Since this is not a particularly popular combination, I didn't bother to produce a variant for it, you can simply snip these a bit to make them shorter, as I have done.