Kayak pedal drive storage solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kayak pedal drive storage solution for gladiator gear track
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
So I needed a storage solution for my kayak pedal drive. It is a knock off chineese hobie mirage flap pedal drive. I have Gladiator geartrack slat wall. I designed a storage rack for it. I still havent found a print orientation I like. I tried right side up and it made the hooks weak and they snapped off. I tried on the side with organic supports and that was ok. A draft quality profile with grid supports with the whole thing on its side is probably the best solution but will have a lot of support clean up.
Print recommendations:
I printed in ASA on its side with organic supports in draft mode. It did ok but it would probably be better with grid supports