1 / 3
Universal Corner Sink drainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sink drainer for your toothbrush, lotions, etc to not get wet and leave marks. Works for both square & round sinks.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
HOW TO PRINT:
1.For the base, smaller layer lines / more quality means better water flow. Or you can rotate for the model to stand upward with supports for the smoothest flow but i have not tried that.
- I changed to Gyroid infill due to some little collision between the nozzle with the infill during print from Grid infill.
2.For the tray, please set TOP SHELL LAYERS & BOTTOM SHELL LAYERS to 0.
- You can choose whichever infill pattern you would like, i tested a few and Honeycomb worked best for heavier items.
- 5-6 wall loops would help with the overall structure strength in the long term (more is better)