1 / 2
Follower - for Talon Springs - Sure.t Nerf Mod Talon Mag
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A follower for standard Talon springs (wire springs) for the combination mod by Astropulse Sure.t Nerf Mod Talon Mag
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (2)Kolekcje (36)Powiązane
Follower - for Talon Springs - Sure.t Nerf Mod Talon Magazine
A follower for standard Talon springs for the nice combination mod by Astropulse Sure.t Nerf Mod Talon Mag - Fully Printable - Quick Assemble/Disassemble
- I shortened the follower in height slightly and created more space between so that a standard Talon spring fits in.
- Two small posts were added so that the spring has a better hold.
- I also added a screw hole for 3mm screws (10mm long) in case someone wants to use this additional fastening (but it works nice without it too).
My print settings for PLA:
0,2mm layer height
5 Walls
at least 5 top and bottom shell layers
20% gyroid infill
NO supports needed