1 / 3
Li-Time 3000 watt Inverter Remote Pendant Housing — zdjęcie 1
1 / 3

Li-Time 3000 watt Inverter Remote Pendant Housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remote Pendant Housing for the LI-Time 3000 Watt Pure Sine Wave Inverter Charger.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This provides a mounting frame for the Li-Time 3000 watt pure sine wave inverter-charger remote interface console.

I use this inverter-charger as a Battery-Backup/UPS for my Prusa XL and the interface console that comes with it is designed to be mounted in a panel. This housing allows me to place it on the bench next to the printer at a good angle for viewing the screen. Also allows easy access to the inverter power switch so that I don't have to use the switch on the back of printer.

I printed this from PETG face down with PLA as a support material. The console face recesses flush with the housing, so only about the first .07" (1.8mm) of build height needs support.

The housing has fastener holes sized for No. 4 sheet metal screws, the same that come with the console.    

Tagi