1 / 3
2015-20 Honda Fit Cupholder for 32oz water bottle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 32oz Nalgene or Hydroflask (anything about 94mm) doesn't "fit" in the cup holder This gives you an extra cupholder
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 1712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (72)Powiązane
Should work for a left hand drive 2015-2020 Fit
This is 6mm thick, which is probably way overkill. I imagine you could change to 3mm, and pick 4 outer walls in your slicer. That would give you 8 walls total and a very strong part.
I designed this in OnShape, original here. Feel free to modify
https://cad.onshape.com/documents/53c432c3578bdb4c2aeef473/v/c7c2c253effdf05ab7838854/e/452b6fe5624e126b50d28156?renderMode=0&uiState=67465d881de2b047b29f1727