Linkable Tank Tread (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frames can be linked to create a bigger & stronger tank!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed the frames to be linkable to make a large tank setup.
Frames are braced together using 2020 extrusion & M3x8mm screws & T-nuts (Some plastic welding between frames may be necessary)
I have mine braced with 2020 extrusion and the frames printed with 8-10walls @ 30% infill. My full assembled tank can move a 200lbs person easily with the “Tank-Stud Support Beam” running across the 2 treads. I also used chucked drill as drive motors and 8mm steel rods as drive shafts with self-drilling screws through them & drive gears so they don't spin in place)