Festool MFT 3 Side Bracket/ Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A device to hold some wood and clamp it into place if you need to hold it into place like this.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho.
I stumbled upon this Festool Design contest and came up with this holder.
You can slide it on the side of the MFT and use it to hold wood/ oter long things at the side of the table. Also you can kinda clamp it down and keep it in place with a wedge to drill some holes, glue stuff up or manipulate it in annother way.
Since I don't have the MFT3 (yet) I was not able to test it. So if you are the first one to print this design please comment and share if everything works as intended!
Ofc. I testprinted all parts and drytested them.
M8 System
U don't like the wedge system? No Problem. Go for the M8 System ,-)
In addition to the printed parts you will need a M8 Screw (≥38 mm), Nut and a Knob.
https://www.printables.com/model/86250-star-knob-machine-handle-m10-m8
Printing Instructions:
Use some stiff and tough material! I would recommend sth. like PETG-CF, PA-CF, etc. But in my tests PLA performed well too :)
You want the printed parts to be quite strong. So go with >30% Infill and >5 Perimeter.
Have fun!
Also you can check out some other Festool designs by me:
https://www.printables.com/@MeisterEdel/collections/128636
