1 / 12
The BEST Foldable Phone Stand (Print In Place) — zdjęcie 1
1 / 12

The BEST Foldable Phone Stand (Print In Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a GREAT model that works right of the bed, and does what its meant to! Also you can apply many design patterns!

Ocena
5 / 5
Polubienia
17
Pobrania
114
Wydruki
2
Wyświetlenia
498
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Standard Digital File License

What makes it special

This stand folds flat, prints in one piece, and works straight off the bed.

I printed the hinges more than 10 times, and they worked straight off the bed every time. The whole print is fast and light: under 30 minutes and less than 7 grams.

Hinge clearance

The hinge clearance sets how the stand feels. The standard file uses 0.35 clearance, which is the best choice for minimal wobble while staying easy to print. The other files use 0.2 clearance, which is harder to print but more stable, 0.4 clearance, which sits in between with some wobble, and 0.5 clearance, which is easiest to print but has more wobble.

Patterns

You can also give the stand a pattern without opening design software. There are more than 10 patterns to try, and the included 3MF pattern files cover Honeycomb, Hilbert Curve, Archimedean Chords, Gyroid, and Aligned Rectilinear for both Prusa and Bambu.

  • For PrusaSlicer, set solid layers to 0, set infill to any value between 15% and 30%, then pick your infill pattern. Gyroid or Honeycomb give a cool look.

  • For Bambu Studio, change wall loops from the standard 2 to 3, slow speed to below 20 mm/s for a better first layer, set top shell layers and bottom shell layers to 0, then set sparse infill density to any value between 15% and 30% and pick your pattern. Anycubic users can follow the Bambu Studio steps, since those slicers are very similar.

Print Settings:

  • Scaling: If your phone has a phone case, scale it up to 105%-110%

  • Infill: 15%-40%

  • Infill Type: See the pattern steps above

  • Layer Height: 0.17-0.2

  • Supports: NO, this is a print-in-place model

  • Raft: NO

  • Brim: NO

  • Ironing: If you do not use the special design patterns above, enable ironing for an even cleaner surface and better finish

Good to know

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like:

Modern Earbud Holder (Travel Essential)

Gravity Towel Hook | The BEST Towel Hanger

Functional Cord Organizer (Travel Essential)

Sleek Carabiner (Travel Essential)

Twist & Lock Container (3 Sizes!)

Tagi