1 / 3
90 degree Magnet Mount for cup holders with recessed bottom. — zdjęcie 1
1 / 3

90 degree Magnet Mount for cup holders with recessed bottom.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had a spare cup holder that has a 22.5mm recess in the bottom of it for a pipe mount. Would rather make one so I did!

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

V2 (v1 has been removed)

This is my first ever cad design and functional print : )

The recommended bolt length is 60mm, this will generally cover most magnet flanges 2mm.
I used https://www.magnetsource.com/collections/shallow-pots-covers-l1/products/rb70c (if the link ever becomes unavailable - 2.618''/67mm Dia. x 0.375''/9.53mm Thk. w/ 0.275''/7mm Dia. hole 65 lb/29kg. pull)

1 x Bolt m6
1 x Nut (nyloc recommended)
2 x 3.2mm 6.4mm grip blind rivets
1 x Preferred Magnet mount
Supports on buildplate only

On my ender 3 v3 se I seemed to have a problem with under extrusion on overhangs so I turned off "Slow down for overhangs".

The magnet I can source here only has one hole so redrilling is required to fit the rivets.  

Set the rivets then bolt up afterward.

3mf & stl file available

Tagi