90 degree Magnet Mount for cup holders with recessed bottom.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a spare cup holder that has a 22.5mm recess in the bottom of it for a pipe mount. Would rather make one so I did!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
V2 (v1 has been removed)
This is my first ever cad design and functional print : )
The recommended bolt length is 60mm, this will generally cover most magnet flanges 2mm.
I used https://www.magnetsource.com/collections/shallow-pots-covers-l1/products/rb70c (if the link ever becomes unavailable - 2.618''/67mm Dia. x 0.375''/9.53mm Thk. w/ 0.275''/7mm Dia. hole 65 lb/29kg. pull)
1 x Bolt m6
1 x Nut (nyloc recommended)
2 x 3.2mm 6.4mm grip blind rivets
1 x Preferred Magnet mount
Supports on buildplate only
On my ender 3 v3 se I seemed to have a problem with under extrusion on overhangs so I turned off "Slow down for overhangs".
The magnet I can source here only has one hole so redrilling is required to fit the rivets.
Set the rivets then bolt up afterward.

3mf & stl file available