FlashForge Advanturer 3 Fan with Light deffusion KIT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After the first version worked great, the problem was that the HotEnd could no longer be changed.Therefore, the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
After the first version worked great, the problem was that the HotEnd could no longer be changed.
Therefore, the following adjustments were made.
- AirPipe to the back so that there is enough space for the HotEnd
- Distance from air outlets to HotEnd increased.
- Light defusion included in the concept.
Currently there are 2 versions
Version 1 is a mixture of Ferengi Quark's Treasure and Vulcan Vahklas.
To save material the version was adapted.
Since I'm not 100% satisfied with the fit yet, there will be an update every now and then.
As an option there is also a first disk for the LED light. This is not printed in transparent for testing and already works very well.
Please do NOT print the FAN with PLA.
Update 20.02.2022:
- Small updates now it must fit better.
- Version 2 now has a narrower bar
Update 07.06.22: disable => Fan_Dual_New_with_deffusion_V2.stl
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 3
Yes
Supports:
Yes
FINE
Infill:
20%
Category: 3D Printer Accessories