FlashForge Advanturer 3 Fan with Light deffusion KIT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After the first version worked great, the problem was that the HotEnd could no longer be changed.Therefore, the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
After the first version worked great, the problem was that the HotEnd could no longer be changed.
Therefore, the following adjustments were made.
- AirPipe to the back so that there is enough space for the HotEnd
- Distance from air outlets to HotEnd increased.
- Light defusion included in the concept.
Currently there are 2 versions
Version 1 is a mixture of Ferengi Quark's Treasure and Vulcan Vahklas.
To save material the version was adapted.
Since I'm not 100% satisfied with the fit yet, there will be an update every now and then.
As an option there is also a first disk for the LED light. This is not printed in transparent for testing and already works very well.
Please do NOT print the FAN with PLA.
Update 20.02.2022:
- Small updates now it must fit better.
- Version 2 now has a narrower bar
Update 07.06.22: disable => Fan_Dual_New_with_deffusion_V2.stl
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 3
Yes
Supports:
Yes
FINE
Infill:
20%
Category: 3D Printer Accessories