Printed grub screw - for the Corsair blaster (replaces muzzle and grip pins!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These printed grub screws replace the muzzle pins and the grip pin. Can be screwed in and out with a screwdriver.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 490
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Printed grub screw for the Corsair blaster by LeedleDynamics
These printed grub screws replace the muzzle pins and the grip pin. Screw them in with a small flat-head screwdriver. Print 3 of them and screw them in the pin holes until they are flush. (You can also use M6 x 10mm metal grub screws if you have them)
This allows you to easily remove the muzzle and the grip insert, for example to replace the bungee cord, install a different muzzle or install the shoulder stock.
If the grub screws are too wide or too small due to printer tolerances, you can scale them sligthly.
You can find other free mods for the Corsair here.
The file is already pre-oriented.
The screw is designed a bit low poly but work well^^.
My print settings for PLA:
(!) 0,1 mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
no supports needed
a brim is recommended
The files for the Corsair can be purchased and downloaded from Leedle's shop on Printables
Thanks to Robert Salcedo (found in the library of Tinkercad) for the files that I could use for this remix.