Liczymy pasujące modele…
Bring cutting-edge robotics into your collection with this detailed 3D printable STL model of the Boston Dynamics Spot Robot! This advanced quadruped, known for its agility and sophisticated design, is perfect for tech enthusiasts,…
this 3d design connects to the top of a 5a drum stick to help with finger control. This will help you play faster
ACCURACY Barrel Insert - for the HUSH 2 by LeedleDynamics This barrel insert reduces the barrel diameter from 16mm to approx. 15mm to get more accuracy out of the Hush 2. And this blaster can be really accurate! The Hush2 has a 16mm…
When I went to install my Diode Dynamics headlights for the 2015 Civic SI, I noted that their adjustable collar did not provide enough offset to allow for the screw heads. So the bulbs just wouldn't lock in. I got out my micrometer and…
Front Grip + String Cover --- for Leedle's BARNACLE Stringer Blaster --- Since there is nearly no load on the handle, it can also be printed with few walls and infill. The files are already pre-oriented. It needs approx. 40g of filament.…
Iron Sights + Streamline Hammer ---> Mods for Leedle's Calypso Blaster Pin mounted iron sights and a streamlined hammer for the Calypso blaster by Leedle Dynamics. The Iron Sight pins simply replace the top two pins on the blaster. --->…
Print mount with supports Needs 2x M3x25 screws and 2x M3 nuts
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
A miniature model of Legendary F-16 Fighting Falcon, Enjoy Printing (¬‿¬)
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
General Dynamics–Grumman EF-111A Raven Wall Art Silhouette model. Adjustable size. I accept model suggestions.
this 3d design connects to the top of a 5a drum stick to help with finger control. This will help you play faster
Smooth Grip for the Calypso Blaster (by Leedle Dynamics) Grip without the lateral greeblies. --------------------------------------------------------------------------------------------------------------------------- The file is already…
Files in print orientation Needs two M3x30 screws and two M3 nuts
The Hydra musket by Leedle Dynamics is probably one of the coolest blasters I have seen made since his last masterpiece, the Nautilus. Unfortunately, Bruce didn't have Ultra Darts to design with, however, was kind enough to allow me to…
In this house we obey the laws of thermodynamics! Category: Signs & Logos
The Ventus Mini by Zephyr Dynamics is a high-performance, compact EDF jet designed for hobbyists who value precision and efficient aerodynamics. With a wingspan of just 300mm and a length of 328mm, the Ventus Mini offers incredible…
Quick update on Microsoft Dynamics 365 Business Central logo by waldo. Can be printed in five parts. Category: Signs & Logos
Prime grip for the HUSH 2 by LeedleDynamics (a bolt action version or a T-pull version) Optional prime grip with an integrated single sided bolt or a T-pull for the new HUSH 2 to make the prime even more comfortable and cooler. I also…
Shared with permission from LeedleDynamics! If you remix this part, please reach out to LeedleDynamics to discuss permission to publish it. This alternate part for the Hush II might help if you're using Thanhlon mags and the darts keep…
I wanted more control over downforce on my Arrma Limitless as I use it as both a drift car and a speed run car, and the only commercial kit I could find was way too expensive. So I decided to do it myself, and I made this kit which…
Doesn't need any support if any generate you can turn them off. You should print with more walls I printed with 5 and 30% infill.
A big slide, based off the Lanka slide. I havnt tested this yet but i will soon and update with results Remixed from Leedle's Satakiel slide
the rounded version is better for spinning your blaster
Harmony Clips for the Harmony and Melody stringer blasters (by Leedle Dynamics) 10 x short darts 8x short darts I wanted an 8 dart clip and thought I'd make a 10 dart version as well since both weren't available for this Harmony Clip…
Simple Door Delete Mod for the Melody Stringer Blaster (by Leedle Dynamics) If you don't want to use the dust cover door and want to cover the hinge opening, this is for you. Just click it into the hinge opening. I made also a 10 and 8…
This is a design made to attach a Nerf or N strike attachment to the back of the Leedle Dynamics Khopesh. This point attaches to the original mounting point for the Khopesh's stock and is designed to integrate nicely with the original…
Lynx Style Speed Seal Plunger for LeedleDynamics Anemone O-ring: OD 35mm CS 3.1mm or any similar-sized o-ring
A adapter to strap a ComfortMAX headband to most Beyerdynamic Headphones
Made this for my hand x bow wielding dnd character. Uses a small amount of flexible string, mine is 3mm i think. Simply replaces the standard corsair muzzle.
Bring cutting-edge robotics into your collection with this detailed 3D printable STL model of the Boston Dynamics Spot Robot! This advanced quadruped, known for its agility and sophisticated design, is perfect for tech enthusiasts,…
Iron Sights + Streamline Hammer ---> Mods for Leedle's Calypso Blaster Pin mounted iron sights and a streamlined hammer for the Calypso blaster by Leedle Dynamics. The Iron Sight pins simply replace the top two pins on the blaster. --->…
Print mount with supports Needs 2x M3x25 screws and 2x M3 nuts
This mount fits perfect for the frame of the headset, so the soft foam is not squashed. Microphone is detatchable and can be stored seThis mount fits perfect for the frame, so the soft foam is not squashed. Microphone is detatchable and…
This stand works with both the Pro and the Sport versions. Needed: 1x Diode Dynamics SSC2 LED Light 1x M5x50mm cap head bolt 1x Nyloc M5 nut
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
These parts were design for a specific Alluminium extrusion. The name and company can be found on my YouTube channel where I demonstrate how to put it together. The link is here below:
A miniature model of Legendary F-16 Fighting Falcon, Enjoy Printing (¬‿¬)
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
General Dynamics–Grumman EF-111A Raven Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Smooth Grip for the Calypso Blaster (by Leedle Dynamics) Grip without the lateral greeblies. --------------------------------------------------------------------------------------------------------------------------- The file is already…
Files in print orientation Needs two M3x30 screws and two M3 nuts
The Hydra musket by Leedle Dynamics is probably one of the coolest blasters I have seen made since his last masterpiece, the Nautilus. Unfortunately, Bruce didn't have Ultra Darts to design with, however, was kind enough to allow me to…
I wanted a small water reservoir for my students to use when investigating fluid dynamics. This one has lines on the front face every 5 mm. If you shine enough light through the top, you should be to see the water level on the lines. If…
Experience the future of robotics with this incredibly detailed robotic quadruped 3D print model that captures the essence of advanced engineering in STL format. This sleek mechanical canine figurine showcases intricate joint articulation…
Military Art - General Dynamics Land Systems M10 Booker Tank 3D printable model.
Military Art - General Dynamics Stryker 3D printable model.
Ultralight High-Performance Boomerang V4 (No Holes) The upgraded V4 edition of the iconic ultralight boomerang, engineered for maximum flight stability and impressive range! Weighing in at under 18 grams , this high-performance boomerang…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
Still one of the best fighterjets. The XL could be the ultimate F-16 (IMHO). http://www.codeonemagazine.com/article.html?item_id=37 https://www.airforcemag.com/article/1183f16xl/ the green one is a remix:…
I found a logo similar to this a couple years back and it's not here anymore and I changed computers and lost the download. So, I found a jpg online, converted to a svg then imported into tinkercad and exported the stl. Enjoy! Print…
An adapter kit for Diode Dynamics Stage Series 3" Standard LED Pod to adapt it for Toyota fog light longer screws are needed Category: Automotive
Women in Dynamics is supported by Directions 4 Partners, to promote diversity and inclusion within the international Dynamics Community. With Women in Dynamics, we want to create more awareness and to ignite a change within the…
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Company logo of the fictional company "Global Dynamics". Known from the TV-show "Eureka". With multi-color printing, the filament must be changed after each color.
ABOUT THIS MODEL: 2022 Subaru BRZ Fog Light Brackets for Diode Dynamics SS2 SAE Fog Lights After 2 months of development and 5 revisions of this design, I now have the “final” revision printed and mounted on my 2022 Subaru BRZ (as of this…
In my past (unpublished) revisions, PLA has worked for 2 years of winter use. I've now beefed up the legs so they're not so fragile and break and a few further tweaks to stop it being as loose. I'm now using 3dtomorrow's BioPro as an…
The cable is included with the J33 BT adapter (https://amzn.eu/d/bvBbztL). The adapter snaps right into the model, the buttons and ports are still usable and even the mic works great as a headset.
ENG Attention: Not an genuine Boston Dynamics component! Not suitable for heavy payloads! The mounting bracket can be used for easy attachment of light loads to Spot®. The 5 mm cable ties can be attached in two different orientations. 12…
These models print on the Prusa MK3S+ with PLA. It is designed to be sliced at 0.2 mm layer height with a 0.6 mm nozzle. The print can then be scanned on a high resolution flatbed scanner such as the Epson Perfection V600 Photo scanner.…
Designed for the LeedleDynamics Corsair ( https://www.etsy.com/listing/1509623188/corsair-break-action-single-shot ), but will likely fit lots of blasters with Picatinny rails. Intended to hold half-darts, but will likely hold most…
The Hole is optional for a M3 Insert like from Ruthex. The Idea was to get more preasure at the Deskplate. The old one i had before got loose after some time. So I hope this one does not. If you might need another Measure for your…
Add some 3M VHB double sided adhesive or other similar product to the back and stick it onto your DT880s
una tavoletta esplicativa del terzo principio della dinamica stampato con la tecnica della stampa inversa
A barrel insert for the LeedleDynamics Corsair, made to shoot Ultra darts. It prints just like the Elite barrel insert
This is a holder for the barrel insert of the Corsair. it doubles also as a fake scope. It is mounted on the top picatinny rail via the included pin, and if you want to use the barrel extension you'll first need to mount this first, due…
Created the General Dynamics F-16 Fighting Falcon wall art model by creating a SVG file. Then importing the SVG file into Fusion360, then editing and creating the STL. Printed on the Creality Ender 3 Pro and the Creality K1. I am printing…
A Wall mount for the Titan Dynamics Hornet. Place 16" apart on the studs ideally. Print Settings: 3 perimeters, 10-15% infill, 4 top 4 bottom. Mirror for left and right.
A heavily revised version of the Stringer Mega Masterkey by Bruce LeedleLeedleLeedleLee that is specifically designed and tailor fit to act as an underbarrel attachment for the NSK-X blaster. This has a special grip portion that sits…
Thermodynamics teaching set (LEGO-Based) - Total and partial differentials These tiles can be used to teach the concept of integration over d Q , d W and d U differentials in thermodynamics. The tile sizes are of standard Duplo brick,…
This cradle is supposed to hold the DJI O3 Air Unit. Two of the mounting screws of the air unit need to be replaced with slightly longer ones (M1.6). The cradle itself attaches to a modified “fuse1” part of the Micro Talon. I'm using four…
**If you print it please post a make and let me know how I could improve the model Purchased some led switchback modules for my side by side DIY street legal project. Modules come sealed but no real way to mount them besides double sided…
The General Dynamics F-16 Fighting Falcon is an American single-engine supersonic multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it…
This is a low poly model of the Boston Dynamics Atlas robot as used in the DARPA Robotics Challenge Trials in December 2013 in Homestead, Miami. It is based off the model available as open source via the drcsim project (…
I like the original one but also wanted a smaller square one in addition. Working parts tray organizer for keeping track of small components and hardware Dimensions are 90mm x 90mm x 11.6mm. printed in pla, 3 perimeters, 10% gyroid
Very minimalistic caps that fit into the center of the Pro-Race wheels manufactured by Rimstock/Team Dynamics. Design includes a ridge to reuse the original spring from the original cap. Test fitted on the Pro-Race 1.2 in the size 18x8…
Recently i have been printing Leedle Dynamic's blasters but when i used cheap converted X-shot darts they just got stripped apart. to counteract this, I made and tested this model until i cam to this design. the tip is beveled to allow…
tldr; If your Maraca's pusher dangles, replace the Pusher.stl by the provided StabilizedPusher.stl in your print. --- The Maraca blaster works exceptionnally well, however mine ran into a major issue. The pusher (file Pusher.stl ) was…
