Philips Sonicare 9900 Prestige Charger Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I haven't found a wall mount for my Philips Sonicare 9900 Prestige toothbrush. So I decided to design one myself.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I haven't found a wall mount for my Philips Sonicare 9900 Prestige toothbrush.
So I decided to give it a try and design one myself.
I'm quite happy about the result.
I took inspiration from Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare), it's not a remix, though.
The charger holder is quite narrow. My first attempt was done with a diameter of 61mm, but I found this to be a little bit to lose. I've changed it to 60.50mm now and it's a good, snug, fit. If you still find the plastic to come out, you may just want to tape it down using double sided tape.
There's no screw holes, because I taped it to the wall.
It does feature some basic cable management.
I've printed it with
- 3 wall loops
- 15% adaptive cubic infill
- Concentric top surface pattern (probably not the best choice)
- Tree support (on build plate only)
- Ironing of all top surfaces (not really needed imho)
- Avoid crossing walls (unnecessary I think)
- max detour length of 300mm