1 / 6
S-Hook Adapter for 16 mm IKEA Kitchen Rods | S-Hakenadapter für 16 mm IKEA-Küchenstangen — zdjęcie 1
1 / 6

S-Hook Adapter for 16 mm IKEA Kitchen Rods | S-Hakenadapter für 16 mm IKEA-Küchenstangen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for attaching an S-hook for 20 mm rods to a 16 mm rod. | S-Haken-Adapter für 16 mm Stangen.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
122
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
EN:

I don't know about you, but I just can't stand it when the S-hooks are not firmly attached to the rods and keep falling off. So I made myself an adapter that solves the problem and that you might need too. I remember that the matching S-hooks originally came from Ikea and have an inner diameter of 20 mm and a strand diameter of 3.5 mm.

There is a STEP file for your customisations.

I printed the adapters upright with organic support and 15% infill. PETG works well for me, but TPU probably works even better.

— I would be very happy if you have as much fun with the things as I do. — 

 If you like Buy Me a Coffee :-) Thank you very much!

DE:

Ich weiß ja nicht, wie es euch damit geht, aber ich ertrage es einfach nicht wenn die S-Haken nicht fest mit den Stangen verbunden sind und dauernd abfallen. Also habe ich mir einen Adapter gebastelt, der das Problem löst und den ihr vielleicht auch braucht. Die passenden S-Haken stammen nach meiner Erinnerung ursprünglich auch von Ikea und haben einen Innendurchmesser von 20 mm sowie einen Strang-Durchmesser von 3,5 mm.

Für eure Anpassungen gibt es eine STEP-Datei.

Ich habe die Adapter hochkant mit organischem Support und 15% Infill gedruckt. PETG funktioniert bei mir gut, aber TPU wahrscheinlich noch besser.

Tagi