1 / 2
Level 4 Sierpiński Snowflake Fractal (Vase Mode) (2D Version) — zdjęcie 1
1 / 2

Level 4 Sierpiński Snowflake Fractal (Vase Mode) (2D Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Versatile Design: 2D cut of my Level 4 Sierpiński Snowflake fractal. Great for earrings, medallions, coasters or tiles!

Ocena
0 / 5
Polubienia
14
Pobrania
78
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Math
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Check out this model's counterpart here!: https://www.printables.com/model/1121851-snowflake-fractal-level-4-vase-mode

This 2D version of my Level 4 Sierpiński Snowflake Fractal is a versatile and eye-catching design. Created by cutting a layer from the original 3D fractal and extruding it into a flat pattern, this piece is perfect for a variety of creative uses.

Whether you’re making earrings, medallions for jewelry, tileable patterns, or even a beautiful (but not super effective) coaster, this design is as functional as it is stunning.

Print Instructions:

  • Slice Gap Closing Radius: Set it to ZERO or this model won't slice properly.
  • Vase Mode: Enable vase mode for a clean, efficient print.
  • Bottom Layers: Set to ZERO to achieve the intricate cutout pattern.
  • Skirt: Use a one- layer skirt to ensure the pattern starts smoothly and without errors.

Download, print, and let your creativity run wild!

Note: It’s possible to print this model with the same beautiful line pattern without using vase mode. This is especially useful if you want to scale it up for coasters or other purposes!

To do this:

  1. Turn off vase mode and switch to regular slicing mode.
  2. Set top and bottom shell layers to 0.
  3. Set infill density to 0.
  4. Adjust wall thickness and line width in your slicer to achieve the desired effect.
  5. Set your slice gap closing radius to 0 (unless scaling up, where it may not matter as much).

I should also mention that if you’d like a solid bottom, you can set your bottom layers to however many you want instead of zero. Bonus points if you change your filament after the bottom layers to create a dual-color piece!

Feel free to PM me or leave a comment if you have any questions or about the model—I’d love to hear from you!

Have fun! 🥳

License Information:

This model is licensed under Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA). You may share, copy, and redistribute the file for non-commercial purposes with proper attribution. Modifications must remain under the same license. Selling this model or modified versions, either digitally or as physical prints, is strictly prohibited.

*Selling physical prints of my designs is only permitted if you are an active member of my Authorized Seller tier on Patreon, Printables, or MakerWorld.* To learn more, visit https://www.patreon.com/c/endlessdesignlab

Thank you for downloading and supporting Endless Design Lab! 🌀

Endless Design Lab has many more mind-melting models to be unveiled!

Please show your support by following me on all platforms. 
https://linktr.ee/EndlessDesignLab

📲 Social Media
Instagram | YouTube | X/Twitter | Threads | TikTok | Facebook

♾ My 3D Model Pages & Memberships
MakerWorld | Printables | Cults3D | Thangs | Patreon | Printables Club

🤝 Want to collaborate?
📧 Email me at [email protected]

Tagi