2020 extrusion hinge outside corner mount 200 degree opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hinge for 2020 extrusions. for mounting .25" panels to face end.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I needed a hinge to mount a .25" polycarbonate ( roughly .220" thick ) to the front of my home made enclosure. The hinge mounts to the outside edge with 3x m5 bolts, allows a 6mm overlap on the front edge of the 2020 extrusion, and allows for a .125" weather strip pad to have 1/32" of “squish”. The panel side hinge mounts with 3x m4 bolts and the sandwich plate allows m4 nuts to lightly press in. The cap slides over a rod and allows for a cross pin to be inserted to secure the pin. I had some .25" aluminum rod handy ( roughly .257" diameter ) so I used that for the hinge pins.
Solidworks shows 202º of free rotation before any collision which allows for the doors to easily achieve an opening of 180º.
I used PLA+ for the outer pieces, and PETG for the sandwich plate on the inside.
.6mm nozzle
.2mm layer height
20% infill
5 vertical walls
5 horizontal walls
no supports needed.
If you wish to print this all in the same material, A sample layout has been provided for 4 assemblies.
Enjoy