Ford trim panel clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door Card and Exterior Trim Panel Clip
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
\\ Clip/s created for Ford Turneo Custom 2024 exterior panel trim.
\\ Not wanting to wait for delivery, I decided to remake my own clips for the Ford Turneo exterior panel trim as the originals somehow got lost/fell out and the whole trim oscillated , creating an annoying sound.
The original can be seen below:
My remake outfitted:
\\ Print Settings
I have my own .3mf files in the folder section. At first I printed the clip using PETG @ 0.25n 0.15mm at an angle for ease of support removal and lateral strength as shown below. But my PET-G was old, wet, hence brittle. [I included .3mf for this as well, your results may vary] 
PETG supports screenshot
Printing with Hard Flex 92A yields best results for strength and flexibility. I would recommend only printing with TPU. [Files included as well]
TPU supports screenshot
If .gcode files for the TPU @ 0.25n are necessary, feel free to message me and I will upload my gcode.
\\ f3d files included
\\ Check yourself if the clip is held properly. I recommend adding isolation layer as seen on the original clip, eg. cutting an inner tube.
Enjoy :)