YAMI 2X2 double blowing Fan for Ender 3 v3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy Print Better cooling No congestion Symmetry Made with love
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
JST 1.25MM for BL-Touch 5pin 10cm Aliexpress
JST 1.25MM for All Fans 2pin 15cm Aliexpress
5015 (5500 rpm) 24V 2 pieces Aliexpress
4010 24V 2 pieces Aliexpress
BL-touch Aliexpress (if you need, but you can use your CR-touch, I use it, because my CrTouch was broken)
M3 bolt (it will need your all time) Aliexpress
Pay attention to the location of the + and - pins. You can solder or reverse the order or rearrange the pins and carefully pick them up with a knife.
PLA/PETG/ABS - any
PLEASE Calibrate the Z-offset before print or buy new table)