Mount Cover for Flydigi Vader 4 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the ugly unused mount at the top of the Flydigi Vader 4 Pro. Should also work for Vader 3 Pro.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 1124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got tired of seeing that empty mount at the top of the controller. If printed with recommended settings, it is thin enough to not interfere with charging cables, at the very least with the cable included with the controller.
Recommended Settings:
- 0.4mm Line Width
- 0.2mm First Layer Height
- 0.2mm Layer Height
Print is fairly thin, so probably a good idea to allow your build plate to cool before removal.
Alternatively, scrape it off as soon as it is finished, then rest it back on the hot build plate to allow it to flatten back out.
Slots into the accessory mount at the top of the controller.