Mount Cover for Flydigi Vader 4 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the ugly unused mount at the top of the Flydigi Vader 4 Pro. Should also work for Vader 3 Pro.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 275
- Makes
- 0
- Views
- 1,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Got tired of seeing that empty mount at the top of the controller. If printed with recommended settings, it is thin enough to not interfere with charging cables, at the very least with the cable included with the controller.
Recommended Settings:
- 0.4mm Line Width
- 0.2mm First Layer Height
- 0.2mm Layer Height
Print is fairly thin, so probably a good idea to allow your build plate to cool before removal.
Alternatively, scrape it off as soon as it is finished, then rest it back on the hot build plate to allow it to flatten back out.
Slots into the accessory mount at the top of the controller.