Rail Rig — DIY helper stand for 3D printer toolhead assembly and maintenance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom-designed helper stand that simplifies the process of tinkering with and maintaining your 3D printer's toolheads
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
About Rail Rig — DIY helper stand for 3D printer toolhead assembly and maintenance
Rail Rig is a custom-designed helper stand that simplifies the process of working on your 3D printer's toolhead assembly. This DIY solution provides a stable platform for maintaining your printer's hotend, extruder, and other important components, making routine tasks and upgrades more convenient.
Stand uses MG12 rail, added STEP file will allow you to easily modify it for other rail sizes.
Whether you're an experienced 3D printing enthusiast or a beginner looking to improve your printing setup, RailRig is a useful addition to your toolkit. Its user-friendly design and compatibility with various 3D printer models make it a practical accessory for anyone who wants to streamline their printer maintenance routine and achieve consistent, quality prints.
Enhance your 3D printer building experience with Rail Rig – a convenient DIY helper stand for efficient toolhead assembly maintenance.
Bill of Materials and Sourcing guide
| Part | Size / Standard | QTY | Source |
| M3 bolts | M3x16 SHCS | 2 | Buy here |
| M3 threaded heat set inserts (M3*OD:5*L:4) | M3x5x4 | 2 | Buy here |
| Linear rail with MGN12H bearing | MGN12H 250 — 300mm | 1 | Buy here |
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3d printing process | FDM (fused deposition modeling) |
| Infill type | Support cubic, Grid, Gyroid, Honeycomb, Triangle or Cubic |
| Material | PLA, PETG, ASA, ABS |
| Infill percentage | 25 - 40% |
| Layer height | 0.2mm, recommended |
| Wall count | Recommended: 4 |
| Solid top/bottom layers | Recommended: 5 |
| Extrusion width | 0.4mm, recommended |
How to support the project
Here are most popular choices how to do so:
- Consider becoming member of Iconic FAB Club on Printables and get all Paid models and Manuals for single membership fee, starting from as low as $3.
- Press like and download model files. It helps more than I can express.
Change log
| Date | Changes |
| 14.01.2025 | Initial version |